Download the latest version from jjm2473 RTD129X Openwrt 18.06 site and put the zip file as it is on a USB stick.
I hope the images are mostly self explaining.
navigate to QUICK SETTINGS / SETTING depending on your model
choose the downloaded file from the USB stick
press Update button
after reboot open http://openwrt/cgi-bin/luci in your favourite Webbrowser
I recommend to setup a password first so navigate to System / Administration
enter a new password and confirm it
press SAVE & APPLY button
navigate to System / Mount Points
press the GENERATE CONFIG button
enable the Mount Point /mnt/mmcblk0p2
press SAVE & APPLY button
navigate to Services / Network Shares
press the ADD button
| Name | mmcblk0p2 |
| Path | /mnt/mmcblk0p2/media/0 |
| Browse-able | checked |
| Force Root | checked |
| Allow guests | checked |
press SAVE & APPLY button
Samba Network Share is now accessable from Windows
\\OpenWrt\mmcblk0p2
Storage
\\OpenWrt\mmcblk0p2\Download
Storage/Download
Above works fine and is very useful. Thank you.
Can one get same result with SATA HDD with NTFS file system? In other words: is there a method to get access to ZIDOO’s hard disk from the windows10 PC in local network?
hi there. Just updated my Z10 with this one, and yes, you can access the INT HD on the Z10.
best, Dikke
Hello, at home it does not work I have a zidoo z9S, in 3.35, I followed your guide, the update is doing well, but impossible to mount the mmcblk0p2 partition.
It puts me modification not carried out at the top of the window. And even by enforcing it, it doesn’t work.
Even if you manually mount the partition on reboot it comes back to the same point.
I do wonder with this version, is it possible to make schnappshots? Since i can’t find that..
Hello
Under Windows 10, OpenWrt is empty, mmcblk0p2 does not appear
Thanks for your help
Louis
One problem would be that I want to set up network access to the USB device.
Even if you manage to set one of the options, it will add write access to the root directory, if you want to write it inside a folder, it will write write protection. If I enter a username, you will be asked for a password.
Where do I enter the password associated with the username? I don’t see such an option in Samba settings
Hi,
Pushed latest update to my X8, it worked fine but all changes I make can’t be saved. I see changes not applied and when I try to save / apply it remains unsaved. Rolled back to openwrt original (from OTA) it works fine. Any clue?
the only issue is that if you reinstall the zidoo FW ( i had issues with HT ) , you are back on the old openwrt.
I’ve done this update but now I can’t connect using FTP as I did before. It is enabled. Please help?
Can I find somewhere an updated OpenWRT file for X20?
the one given at the beginning works on x20.
I installed it, checked it and it’s OK
Bonsoir, les changements suivis à la lettre ne s’appliquent pas dans OpenWRT. “Enregistrer et appliquer” ne fait rien, Comment faire ?
Cordialement